Baileys Premium Gelcoat in Brilliant White (500g / with Hardener)

Description

Baileys Premium Polyester Gelcoat in brilliant white 500g. This thixotropic Gelcoat is a high-quality Lloyds approved coating which provides excellent weathering and water resistance properties to fibreglass. Gelcoat is often used as the first layer in a mould, and when cured it forms a high gloss finish on the outer layer of the finished product. Apply high grade UV stabilised gel coating using a brush or roller in workshop temperatures between 16°C to 23°C.

This Gelcoat is supplied with MEKP liquid catalyst, which is required for the coating to cure. The mix ratio is 2 parts MEKP hardener to 100 parts Gelcoat.

For best results, the gelcoat should be applied to a clean, polished mould in one even layer 0.4mm to 0.5mm thick (400 to 500 microns).

Gel time: less than 15 minutes

Cure time: less than 90 minutes

Please Note: Due to carrier restrictions we are currently unable to send this part abroad and to the following UK postcodes: AB, BT, DD, DG3, DG4, DG6, DG7, DG8, DG9, EH, FK, G, HS, IM, IV, KA, KW, KY, ML, PA, PH, PO30 – PO41, TD, TR21 – TR25, ZE.

baileys fibreglass gelcoat flowcoat safety data sheet

Manufacturer Part Number: 7602