Cleaning heating and cooling systems

Description

Engine cleaners are used for cleaning all types of heating and cooling systems.

Fresh water cooling: Pour the liquid into the cooling system and start the engine so that the liquid circulates well. It is advisable to go on a few trips so that the engine warms up. Let the liquid work for about 2 days. Drain, rinse well and fill with clean water and coolant. NOTE! Zinc anodes must be removed before using system cleaner. Salt water cooling: Close the intake valve. Start the engine until it is also empty of salt water. Fill with the correct fresh water dosage and system cleaner on the intake side. Start the engine and let it run until the mixture comes out of the exhaust system (the procedure must be adapted to each engine depending on how the cooling system is structured). Let the liquid stand for about 2 days. After cleaning, open the bottom valve and run the engine. Contents: 1 l